UPS APC Symmetra PX 250kW scalable to 500kW – SY250K500D

UPS APC Symmetra PX 250kW scalable to 500kW – SY250K500D

Jual UPS APC Symmetra PX 250kW scalable to 500kW – SY250K500D

jual APC Symmetra PX 250kW scalable to 500kW - SY250K500D

Symmetra PX 250kW Scalable to 500kW without Maintenance Bypass or Distribution-Parallel Capable (SY250K500D)
– A high-performance, 3-phase, modular, scalable, power protection solution with industry-leading efficiency, capacity, and performance for medium to large data centers …
– Includes: Assembly service, Installation guide, Network Management Card, Start-Up Service, User Manual

Key Features APC Symmetra PX 250kW to 500kW SY250K500D
– Run time for load : 250000 W 6m
– Max. Capacity Used : 100%
– Output power capacity : 250.0kWatts / 250.0kVA
– Nominal Output Voltage : 400V 3PH, 480V 3PH
– Nominal Input Voltage : 400V 3PH, 480V 3PH
– Input Connections : Hard Wire 4-wire (3PH + G), Hard Wire 5-wire (3PH + N + G)

harga APC Symmetra PX 250kW scalable to 500kW - SY250K500D

Symmetra PX 250kW Scalable to 500kW without Maintenance Bypass or Distribution-Parallel Capable
A high-performance, 3-phase, modular, scalable, power protection solution with industry-leading efficiency, capacity, and performance for medium to large data centers and mission-critical environments. Multiple UPSs can be installed in parallel for ultra-efficient system redundancy or up to 2MW of power protection. Parallel installations with custom switchgear and installations using a 3rd-party maintenance bypass panel require the APC Symmetra PX250/500 Third Party Switchgear Kit for breaker monitoring and EPO functionality.
Includes: Assembly service, Installation guide, Network Management Card, Start-Up Service, User Manual

– Automatic self-test : Periodic battery self-test ensures early detection of a battery that needs to be replaced.
– Battery failure notification : Provides early-warning fault analysis on batteries enabling timely preventive maintenance
– Battery modules connected in parallel : Delivers higher availability through redundant batteries.
– Battery replacement without tools : Enables fast battery replacement, lowering Mean Time to Repair (MTTR).
– Dual mains input : Increases availability by allowing the UPS to be connected to two separate power sources.
– ECO Mode : Operating mode that by-passes unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection
– Front-access servicing : Simplifies installation and UPS maintenance while minimizing space requirements.
– Intelligent battery management : Maximizes battery performance, life, and reliability through intelligent, precision charging.
– LCD graphics touch screen display : Full color text and mimic diagrams that easily display modes of operation, systems parameters and alarms.
– Mega Tie : During maintenance procedures, maintain full protection by transferring the load from one independent Symmetra PX 250/500kW system to another.
– Output synchronization to external source : UPS systems can be synchronized with any other independent source for use with downstream static transfer switches.
– Parallel-capacity capable : Increases total power capacity by using multiple uninterruptible power supplies simultaneously.
– Parallel-redundant capable : Power the connected equipment with multiple uninterruptible power supplies to increase system redundancy
– Remote Display : Download the display interface to your laptop or personal computer. Remotely monitor the UPS and configure a sub-set of UPS parameters. Note: Remote start-up and shutdown are not supported.
– Scalable runtime : Allows additional run time to be quickly added as needed.
– Supports 3rd party maintenance bypass : The APC Symmetra PX250/500 Third Party Switchgear Kit is required for installations with custom switchgear or a 3rd-party maintenance bypass panel. The boards in this kit monitor the breakers and provide EPO functionality.
– Swappable batteries : Allows quick addition of runtime capacity or replacement of existing battery modules. Installed modules are automatically recognized by the system.
– Temperature-compensated battery charging : Prolongs battery life by regulating the charge voltage according to battery temperature.

Symmetra PX Features & Benefits

Agility :
– Programmable frequency : Ensures compatibility with different input frequencies.
– Scalable power capacity : Reduces UPS over-sizing costs today by allowing quick power upgrades, within the same footprint, later.
– SmartSlot : Customize UPS capabilities with management cards.

Total Cost of Ownership
– Generator compatible : Ensures clean, uninterrupted power to protected equipment when generator power is used.
– Input power factor correction : Minimizes installation costs by enabling the use of smaller generators and cabling.
– Fully-rated power kVA equals kW : Reduces cost by eliminating the need for an oversized UPS for Power Factor Corrected (PFC) loads.
– 5×8 Start-up service included : Required for full coverage of factory warranty

Availability
– Automatic internal bypass : Supplies utility power to the connected loads in the event of a UPS power overload or fault.
– Modular design : Provides fast serviceability and reduced maintenance requirements via self-diagnosing, field-replaceable modules.
– Network manageable : Most models provide remote power management options of the UPS over the network. Many do not have NMC embedded.
– Swappable power modules : Allows quick addition of power capacity or replacement of existing power modules. Installed modules are automatically recognized by the system.
– Power Modules connected in parallel : Enhances availability by allowing immediate, seamless recovery from isolated module failures.
– Redundant Intelligence Modules : Provides higher availability to the UPS connected loads by giving redundant communication paths to critical UPS functions.
– Configurable for N+1 internal redundancy : Provides high availability through redundancy by allowing configuration with one more Power Module than is necessary to support the connected load.

Manageability :
– LED status indicators : Quickly understand unit and power status with visual indicators.
– Audible alarms : Provides notification of changing utility power and UPS power conditions
– Integrates with StruxureWare Data Center Expert : An IT-ready, scalable access monitoring system that collects, organizes, and distributes critical alerts, surveillance video and key information, providing a unified view of complex physical infrastructure environments from anywhere on the network

Marketing Features :
– Battery modules connected in parallel : Delivers higher availability through redundant batteries.
– User-replaceable power modules : Enables simple upgrades and replacements of the Power Modules.
– User-replaceable batteries : Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)

Sustainability :
– EU CoC for UPS : Ensures that UPSs sold in the EU are highly efficient

Technical Specifications APC Symmetra PX 250kW to 500kW SY250K500D

Output :
– Max Configurable Power (Watts) : 500.0kWatts / 500.0kVA
– Output Voltage Distortion : Less than 2%
– Output Frequency (sync to mains) : 50 Hz, 60 Hz
– Output Frequency (not synced) : 60Hz +/- 0.1% for 60Hz nominal, 50Hz +/- 0.1% for 50Hz nominal
– Other Output Voltages : 415
– Topology : Double Conversion Online
– Waveform type : Sine wave
– Overload Operation : 10 minutes @ 125% and 60 seconds @ 150%
– Output Voltage THD : < 2% linear load and <3% non-linear load
– Output Voltage Tolerance : +/-1% static and +/- 5% at 100% load step
– Transfer Time : 2ms typical
– Bypass : Built-in Static Bypass

Input :
– Input frequency : 40 – 70 Hz (auto sensing)
– Input voltage range for main operations : 340 – 460 (400V), 408 – 552 (480)V
– Input Total Harmonic Distortion : Less than 5% for full load
– Type of Input Protection Required : 3-pole breaker
– Other Input Voltages : 415
– Maximum Short Circuit Withstand (Icw) : 50.0kAmps
– Input Power Factor at Full Load : 0.99

Batteries & Runtime :
– Battery type : VRLA
– Included Battery Modules : 16
– Typical recharge time : 8hour(s)
– RBC Quantity : 6
– Extendable Run Time : 1
– Battery Volt-Amp-Hour Capacity : 82944
– Extended Run Options : Symmetra-PX-250kW-Scalable-to-500kW-without-Maintenance-Bypass-or-Distribution-Parallel-Capable
– Efficiency in Battery Operation : 96.0 %
– Overload Operation : 10 minutes @ 125% and 60 seconds @ 150%
– Runtime : View Runtime Graph & View Runtime Chart
– Efficiency : View Efficiency Graph

Communications & Management :
– Interface Port(s) : SYPX250-500_Parallel
– Pre-Installed SmartSlot™ Cards : AP9635
– Control panel : Touch Screen LCD User Interface
– Emergency Power Off (EPO) : Optional
– Available SmartSlot™ Interface Quantity : 1

Physical :
– Maximum Height : 1991MM, 199.1CM
– Maximum Width : 3300MM, 330.0CM
– Maximum Depth : 1070MM, 107.0CM
– Net Weight : 4542.0KG
– Shipping weight : 5003.0KG
– Shipping Height : 2150MM, 215.0CM
– Shipping Width : 4860MM, 486.0CM
– Shipping Depth : 1270MM, 127.0CM
– Color : Black

Environmental :
– Operating Temperature : 0 – 40 °C
– Operating Relative Humidity : 0 – 95 %
– Operating Elevation : 0-999.9meters
– Storage Temperature : -15 – 40 °C
– Storage Relative Humidity : 0 – 95 %
– Storage Elevation : 0-15000meters
– Audible noise at 1 meter from surface of unit : 54.0dBA
– Online thermal dissipation : 30946.0BTU/hr
– Protection Class : NEMA 1, IP 20

Conformance :
– Approvals : cUL Listed, CSA C22.2 No.107.3-05, EN/IEC 62040-1-1, EN/IEC 62040-2, EN/IEC 62040-3, Eurobat General Purpose, OSHPD, UL 1778, UL 60950-1, UL Listed
– Standard warranty : 1 year on-site repair or replace with factory authorized Start-UP

Sustainable Offer Status :
– Proposition 65 Warning : Available in Documentation tab

Important keyword :
UPS APC Symmetra PX 250kW scalable to 500kW – SY250K500D ,
jual APC Symmetra PX 250kW to 500kW SY250K500D ,
harga APC Symmetra PX 250kW to 500kW SY250K500D ,
beli APC Symmetra PX 250kW to 500kW SY250K500D ,
spesifikasi APC Symmetra PX 250kW to 500kW SY250K500D

APC Symmetra PX 96kW scalable to 160kW – SY96K160H-PD

APC Symmetra PX 96kW scalable to 160kW – SY96K160H-PD

APC Symmetra PX 96kW scalable to 160kW – SY96K160H-PD

jual APC Symmetra PX 96kW scalable to 160kW - SY96K160H-PD

Symmetra PX 96kW Scalable to 160kW, 400V w/ Integrated Modular Distribution

– A high-efficiency 3-phase UPS with integrated modular distribution that can be right-sized to your data center power requirements. With scalable power, distribution …
– Includes: Network Management Card, Start-Up Service, User Manual

Key Features Symmetra PX 96kW scalable to 160kW – SY96K160H-PD
– Run time for load : 96000 W 5m
– Max. Capacity Used : 100%
– Output power capacity : 96.0kWatts / 96.0kVA
– Rack Height : 42U
– Nominal Output Voltage : 230V, 400V 3PH
– Nominal Input Voltage : 400V 3PH
– Input Connections : Hard Wire 5-wire (3PH + N + G)
– Maximum Input Current : 197.0A

Symmetra PX 96kW Scalable to 160kW, 400V w/ Integrated Modular Distribution
A high-efficiency 3-phase UPS with integrated modular distribution that can be right-sized to your data center power requirements. With scalable power, distribution and run-time, this UPS grows with your data center up to 160kW/160kVA. Suitable for small to medium data centers or individual zones of large data centers.
Includes: Network Management Card, Start-Up Service, User Manual

Fitur Symmetra PX 96kW scalable to 160kW – SY96K160H-PD

– Automatic self-test : Periodic battery self-test ensures early detection of a battery that needs to be replaced.
– Battery modules connected in parallel : Delivers higher availability through redundant batteries.
– Battery replacement without tools : Enables fast battery replacement, lowering Mean Time to Repair (MTTR).
– Intelligent battery management : Maximizes battery performance, life, and reliability through intelligent, precision charging.
– LCD display : Alpha-Numeric Display which displays system parameters and alarms.
– Manageable external batteries : Reduces preventative maintenance service needs by monitoring the health and status of the external batteries and their expected runtime.
– Swappable batteries : Allows quick addition of runtime capacity or replacement of existing battery modules. Installed modules are automatically recognized by the system.
– Temperature-compensated battery charging : Prolongs battery life by regulating the charge voltage according to battery temperature.
– User-replaceable batteries : Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)

Symmetra PX Features & Benefits
Agility :
– Programmable frequency : Ensures compatibility with different input frequencies.
– Scalable power capacity : Reduces UPS over-sizing costs today by allowing quick power upgrades, within the same footprint, later.
– SmartSlot : Customize UPS capabilities with management cards.

Total Cost of Ownership :
– Generator compatible : Ensures clean, uninterrupted power to protected equipment when generator power is used.
– Input power factor correction : Minimizes installation costs by enabling the use of smaller generators and cabling.
– Fully-rated power kVA equals kW : Reduces cost by eliminating the need for an oversized UPS for Power Factor Corrected (PFC) loads.
– 5×8 Start-up service included : Required for full coverage of factory warranty

Availability :
– Automatic internal bypass : Supplies utility power to the connected loads in the event of a UPS power overload or fault.
– Modular design : Provides fast serviceability and reduced maintenance requirements via self-diagnosing, field-replaceable modules.
– Network manageable : Most models provide remote power management options of the UPS over the network. Many do not have NMC embedded.
– Swappable power modules : Allows quick addition of power capacity or replacement of existing power modules. Installed modules are automatically recognized by the system.
– Power Modules connected in parallel : Enhances availability by allowing immediate, seamless recovery from isolated module failures.
– Redundant Intelligence Modules : Provides higher availability to the UPS connected loads by giving redundant communication paths to critical UPS functions.
– Configurable for N+1 internal redundancy : Provides high availability through redundancy by allowing configuration with one more Power Module than is necessary to support the connected load.

Manageability :
– LED status indicators : Quickly understand unit and power status with visual indicators.
– Audible alarms : Provides notification of changing utility power and UPS power conditions
– Integrates with StruxureWare Data Center Expert : An IT-ready, scalable access monitoring system that collects, organizes, and distributes critical alerts, surveillance video and key information, providing a unified view of complex physical infrastructure environments from anywhere on the network

Marketing Features :
– Battery modules connected in parallel : Delivers higher availability through redundant batteries.
– User-replaceable power modules : Enables simple upgrades and replacements of the Power Modules.
– User-replaceable batteries : Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)

Sustainability :
– EU CoC for UPS: Ensures that UPSs sold in the EU are highly efficient

Technical Specifications Symmetra PX 96kW scalable to 160kW – SY96K160H-PD

Output :
– Max Configurable Power (Watts) : 160.0kWatts / 160.0kVA
– Neutral Output Current : 240A
– Output Voltage Note : Configurable for 380 : 400 or 415 V 3 Phase nominal output voltage
– Efficiency at Full Load : 95.0 %
– Output Voltage Distortion : Less than 2%
– Output Frequency (sync to mains) : 50/60 Hz +/- 3 Hz user adjustable +/- 0.1
– Output Frequency (not synced) : 50Hz +/- 0.1% for 50Hz nominal
– Topology : Double Conversion Online
– Waveform type : Sine wave
– Overload Operation : 10 minutes @ 125% and 60 seconds @ 150%
– Output Voltage THD : < 2% for 0 to 100% linear load and < 6% for full non linear load
– Output Voltage Tolerance : +/-1% static and +/- 5% at 100% load step
– Bypass : Built-in Static Bypass

Input :
– Input frequency : 40 – 70 Hz
– Input voltage range for main operations : 340 – 477V
– Efficiency at Full Load : 95.0 %
– Input Total Harmonic Distortion : Less than 5% for full load
– Maximum Short Circuit Withstand (Icw) : 30.0kAmps
– Input Power Factor at Full Load : 0.99

Batteries & Runtime :
– Battery type : VRLA
– Included Battery Modules : 9
– Typical recharge time : 3.5hour(s)
– Nominal Battery Voltage : +/-192 V (split battery referenced to neutral)
– End of Discharge Maximum Battery Current : 332.0A
– RBC Quantity : 4
– DC Overcurrent Protection : 320A
– Extendable Run Time : 1
– Battery Volt-Amp-Hour Capacity : 31104
– Extended Run Options : Symmetra-PX-96kW-Scalable-to-160kW-400V-w– Integrated-Modular-Distribution : End of Discharge Battery Voltage
+/-154 V
– Efficiency in Battery Operation : 94.0 %
– Maximum Available Short Circuit Current : 6kAmps
– Overload Operation : 10 minutes @ 125% and 60 seconds @ 150%
– Runtime : View Runtime Graph & View Runtime Chart

Communications & Management :
– Interface Port(s) : DB-9 RS-232, SmartSlot
– Control panel : Multi-function LCD status and control console
– Audible Alarm : Alarm when on battery : distinctive low battery alarm : configurable delays
– Emergency Power Off (EPO) : Yes
– Available SmartSlot™ Interface Quantity : 2

Physical :
– Maximum Height : 1991MM, 199.1CM
– Maximum Width : 1200MM, 120.0CM
– Maximum Depth : 1070MM, 107.0CM
– Net Weight : 1814.0KG
– Shipping weight : 1963.0KG
– Shipping Height : 2140MM, 214.0CM
– Shipping Width : 1696MM, 169.6CM
– Shipping Depth : 1210MM, 121.0CM
– Color : Black

Environmental :
– Operating Temperature : 0 – 40 °C
– Operating Relative Humidity : 0 – 95 %
– Operating Elevation : 0-999.9meters
– Storage Temperature : -15 – 40 °C
– Storage Relative Humidity : 0 – 95 %
– Storage Elevation : 0-15000meters
– Audible noise at 1 meter from surface of unit : 63.0dBA
– Online thermal dissipation : 17244.0BTU/hr
– Protection Class : NEMA 1, IP 20

Conformance :
– Approvals : EN 50091-1, EN/IEC 62040-1-1, EN/IEC 62040-2, EN/IEC 62040-3, Eurobat General Purpose, ISO 14001, ISO 9001, VFI-SS-111
– Standard warranty : 1 year on-site repair or replace with factory authorized Start-Up

General :
– Bypass Connection : 5 wire (3PH + N + G)
– Bypass Protection Device : 250.0
– Max Bypass Input Current : 250.0A

Important Keyword :
UPS APC Symmetra PX 96kW scalable to 160kW – SY96K160H-PD
jual APC Symmetra PX 96kW to 260kW SY96K160H-PD
beli APC Symmetra PX 96kW to 260kW SY96K160H-PD
harga APC Symmetra PX 96kW to 260kW SY96K160H-PD
spesifikasi APC Symmetra PX 96kW to 260kW SY96K160H-PD