Key Features SURT1000RMXLI-NC
Run time for load Min-max: 70-700 W 700 W 13m 49s
Max. Capacity Used : 100%
Output power capacity : 700 Watts / 1.0kVA
Rack Height : 2U
Output Connections : (2) IEC Jumpers (Battery Backup)
Nominal Output Voltage : 230V
Nominal Input Voltage : 230V
Input Connections : IEC 60320 C14
APC Smart-UPS RT 1000VA, 230V, rackmount, 2U, 6x IEC 60320 & 2x IEC Jumpers outlets, w/network card
High density, double-conversion on-line power protection with scalable runtime.
Includes: CD with software, Rack mounting support rails, Smart UPS signalling RS-232 cable, User manual
Serial connectivity : Provides management of the UPS via a serial port.
LED status indicators : Quickly understand unit and power status with visual indicators.
Network manageable : Most models provide remote power management options of the UPS over the network. Many do not have NMC embedded.
InfraStruXure Manager Compatible : Enables centralized management via the APC InfraStruXure Manager.
Intelligent Card Slot : Customize UPS capabilities with management cards.
Avoids costly power problems by keeping your IT equipment and data protected and available .
Network grade power conditioning protects from damaging surges and disruptive noise. The double conversion architecture provides tight voltage regulation, frequency regulation ,and zero transfer time to battery during power events.
Save time with easy and convenient remote/network accessibility.
Network manageable via serial, USB or Ethernet. Includes Powerchute® Software for convenient monitoring and control, safe operating system shutdown, and innovative energy management capabilities.
Low operating and maintenance costs with proven reliability and intelligent battery management .
Intelligent battery management, pioneered by APC, maximizes battery performance and life through intelligent, precision temperature compensated charging. Automatic self tests insure battery reliability and warn customers in advance of battery replacement. Convenient, easy to connect, hot-swappable battery modules provide battery replacement without powering down.
Peace of mind that comes with full equipment compatibility and reliability of a leader
Provides pure sine wave output which is recommended by server manufacturers using active power factor corrected (PFC) power supplies. Safety agency tested and approved means that you can deploy Smart-UPS with confidence that they meet or exceed the industry’s most rigorous standards.
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Protects connected loads from surges, spikes, lightning, and other power disturbances.
Resettable circuit breaker
Easy recovery from overloads; no need to replace a fuse. (Not available on Wall Tap SKUs)
Ensures clean, uninterrupted power to protected equipment when generator power is used.
Input power factor correction
Minimizes installation costs by enabling the use of smaller generators and cabling.
Provides temporary battery power when the utility power is out.
Frequency and voltage regulation
Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
Disconnected battery notification
Warns when a battery is not available to provide backup power.
Provides notification of changing utility power and UPS power conditions
Predictive failure notification.
Provides early-warning fault analysis ensuring proactive component replacement.
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Protects the initial investment in the UPS when migrating from tower to rack-mount environment.
Flash upgradeable firmware
Install maintenance releases of firmware remotely using FTP.
Plug-and-Play external batteries
Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS.
Automatic internal bypass
Supplies utility power to the connected loads in the event of a UPS power overload or fault.
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Allows additional run time to be quickly added as needed.
Automatic restart of loads after UPS shutdown
Automatically starts up the connected equipment upon the return of utility power.
Temperature-compensated battery charging
Prolongs battery life by regulating the charge voltage according to battery temperature.
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
– Max Configurable Power (Watts) : 700 Watts / 1.0kVA
– Output Voltage Note : Configurable for 220 : 230 or 240 nominal output voltage
– Output Voltage Distortion : Less than 3 %
– Output Frequency (sync to mains) : 50/60 Hz +/- 3 Hz user adjustable +/- 0.1 Hz Sync to mains
– Other Output Voltages : 220 V, 240 V
– Load Crest Factor : 3 : 1
– Topology : Double conversion online
– Waveform type : Sine wave
– Bypass : Built-in bypass
– Input frequency : 50/60 Hz +/- 5 Hz Auto-sensing
– Input voltage range for main operations : 160 – 280V
– Other Input Voltages : 220 V, 240 V
Batteries & Runtime
– Battery type : Lead-acid battery
– Typical recharge time : 3hour(s)
– Replacement Battery : RBC31
– Expected Battery Life (years) : 3 – 5
– RBC Quantity : 1
– Battery Charge Power (Watts) : 109 Watts
– Extendable Run Time : 1
– Runtime : View Runtime Graph
– Efficiency : View Efficiency Graph
Communications & Management
– Interface Port(s) : DB-9 RS-232, SmartSlot
– Control panel : LED status display with load and battery bar-graphs and on line : on battery : replace battery : overload and bypass indicators
– Audible Alarm : Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm
– Emergency Power Off (EPO) : Optional
– Available SmartSlot™ Interface Quantity : 1
Surge Protection and Filtering
– Surge energy rating : 420Joules
– Filtering : Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449
Maximum Height : 85MM, 8.5CM
Maximum Width : 432MM, 43.2CM
Maximum Depth : 483MM, 48.3CM
Net Weight : 23.0KG
Shipping weight : 27.8KG
Shipping Height : 286MM, 28.6CM
Shipping Width : 630MM, 63.0CM
Shipping Depth : 594MM, 59.4CM
Color : Black
Master Carton Units : 1.0
Units per Pallet : 4.0
Operating Temperature : 0 – 40 °C
Operating Relative Humidity : 0 – 95 (Non-condensing) %
Operating Elevation : 0 – 3048meters
Storage Temperature : -20 – 50 °C
Storage Relative Humidity : 0 – 95 (Non-condensing) %
Storage Elevation : 0 – 15240meters
Audible noise at 1 meter from surface of unit : 50.0dBA
Online thermal dissipation : 324.0BTU/hr
Protection Class : IP20
Approvals : C-Tick, CE, EN 50091-1, EN 50091-2, EN 60950, EN 61000-3-2, GOST, VDE
Standard warranty : 2 years repair or replace
Sustainable Offer Status
RoHS : Compliant