APC Power-Saving Back-UPS Pro 1200, 230V
Adjustable voltage sensitivity
Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.
Adjustable voltage-transfer points
Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.
Provides notification of changing utility power and UPS power conditions
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Battery replacement without tools
Enables fast battery replacement, lowering Mean Time to Repair (MTTR).
Battery-protected and surge-only outlets
Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment
Boost and Trim Automatic Voltage Regulation (AVR)
Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).
Provides temporary battery power when the utility power is out.
Dataline surge protection
Provides protection of connected equipment from power surges on the data lines.
Disconnected battery notification
Warns when a battery is not available to provide backup power.
Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
LCD graphics display
Text and mimic diagrams that display modes of operation, system parameters and alarms.
Automatically cuts power to idle equipment to conserve electricity.
Resettable circuit breaker
Easy recovery from overloads; no need to replace a fuse.
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Provides management of the UPS via a serial port.
Telephone dataline surge protection
Provides protection of connected equipment from power surges traveling on telephone lines.
Transformer-block spaced outlets
Protect equipment with input transformer blocks without blocking access to other receptacles.
Provides management of the UPS via a USB port (not available on all models).
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
1200VA / 720W
Nominal Input Voltage 230V
Input voltage range for main operations 176 -294V
Input voltage adjustable range for mains operation 156 – 300V
Input Breaker Capacity 10.0 A
Input Connections (IEC-320 C14 )
Waveform Type : Stepped approximation to a sinewave
Output Connections :
(5) IEC 320 C13 (Battery Backup)
(5) IEC 320 C13 (Surge Protection)
(2) IEC Jumpers (Battery Backup)
Surge Energy Rating
Full time multi-pole noise filtering :10% of IEEE surge let-thgouh : zero clamping response time: instantaneous
Analog phone line for phone/fax/modem/DSL (RJ-11 connector),Network line – 10/100/1000 Base-T Ethernet (RJ-45 connector)
Back-Up Time Half Load
Back-Up Time Full Load
Antarmuka / Interface
DB-9 RS-232, USB
Battery Type Maintenance-free sealed Lead-Acid battery with suspended electrolyte :
Typical recharge time 8 hour(s)
Replacement Battery APCRBC124
112 x 301 x 380 mm (WxHxD)
CD with software
Qty 2 – Detachable 2.0 m IEC power cords
Material produk ini termasuk dalam pengawasan regulasi keselamatan, pengiriman lintas pulau mungkin terkena tambahan biaya atau keterlambatan pengiriman.
Kata kunci Terkait :
jual UPS APC BR1200GI, harga UPS APC BR1200GI, spesifikasi UPS APC BR1200GI, belia UPS APC BR1200GI