Jual Alcatel Lucent iSFP-10G-LR Transceiver Indonesia

Alcatel Lucent Transceivers

Alcatel Lucent Transceiver

iSFP-10G-LR

Product Alcatel Lucent Transceiver iSFP-10G-LR

Product Highlights

Maximum Power Consumption: 1W
Tested in Targeted Switches for Enhanced Performance, Quality, and Reliability
SFP+ Hot Pluggable and MSA Compliant
FS BOX Support for Real-time Configuration
Digital Optical Monitoring Capability for Comprehensive Diagnostics
Optical Compatibility with 10GBASE XENPAK, X2, and XFP Interfaces on the Same Link
Class 1 FDA Laser Safety and Compliance with RoHS Standards
IEEE 802.3ae Compliance

Specification Alcatel Lucent Transceiver iSFP-10G-LR

The Alcatel-Lucent iSFP-10G-LR compatible SFP+ transceiver module is designed for 10GBASE-LR applications, offering compatibility with LC duplex SMF fiber for up to 10km link distances. It adheres to standards like SFF-8431, SFF-8432, and IEEE 802.3ae, with digital diagnostics accessible through a 2-wire serial interface as outlined in SFF-8472. With its low power consumption and high-speed capabilities, this 10G SFP+ transceiver is well-suited for various applications including data centers, enterprise wiring closets, service provider transport, Radio & Baseband Unit, and more.

Specifications
Alcatel-Lucent Compatible	iSFP-10G-LR
Vendor Name	FS
Form Factor	SFP+
Max Data Rate	10.3125Gbps
Wavelength	1310nm
Max Cable Distance	10km
Connector	Duplex LC
Media	SMF
Transmitter Type	DFB
Receiver Type	PIN
TX Power	-8.2~0.5dBm
Receiver Sensitivity	<-14.4dBm
Power Budget	6.2dB
Receiver Overload	0.5dBm
Power Consumption	≤1W
Extinction Ratio	>3.5dB
Commercial Temperature Range	0 to 70°C (32 to 158°F)
Protocols	IEEE 802.3ae, SFF-8472, SFF-8431, SFF-8432, SFP+ MSA Compliant, CPRI, eCPRI

Feature Alcatel Lucent Transceiver iSFP-10G-LR

Enhanced 10G Connectivity for Data Centers: Equipped with 1W low-power consumption, high-density, and high-speed capabilities, the SFP+ transceiver is an ideal solution for facilitating rapid adoption of 10G transmission.
Thorough Testing for Interoperability: Each unit undergoes meticulous testing in host devices to ensure seamless compatibility within the intended switch environment, ensuring reliable performance.
Comprehensive Reliability Testing: Rigorously tested with advanced equipment, our transceivers are subjected to various assessments including optical spectrum, packet loss and CRC checks, eye pattern analysis, mask margin evaluation (>20%), bit error rate testing (BER 1E-12), and temperature endurance (0~70°C) to guarantee superior quality and reliability.

Product	Data Rate (Max)	Wavelength	Cable Distance (Max)	Cable Type	TX Power	Receiver Sensitivity	Power Consumption	Operating Temperature
SFP-10GLR-31	10Gbps	1310nm	10km	SMF	-8.2~-0.5dBm	<-14.4dBm	<1W	0 to 70°C
SFP-10GLR-31-I (IND)	10Gbps	—	—	Cat6A/Cat7 or Better	—	—	<2.5W	-40 to 85°C (IND)
SFP-10G-T	10Gbps	—	30m	Cat6A/Cat7 or Better	—	—	<1.8W	0 to 70°C
SFP-10G-T-I (IND)	10Gbps	850nm	80m	Cat6A/Cat7 or Better	-7.3~-1dBm	<-11.1dBm	≤0.6W (Typical)	-40 to 85°C (IND)
SFP-10G-T	1/10Gbps	850nm	300m@OM3 / 400m@OM4	MMF	-7.3~-1dBm	<-11.1dBm	≤0.6W (Typical)	0 to 70°C
SFP-10GSR-85	10Gbps	1310nm	300m@OM3 / 400m@OM4 / 220m@OM3 / 300m@SMF	MMF/SMF	-6.5~-0.5dBm	<-8.4dBm	<1W	0 to 70°C / -40 to 85°C (IND)

Other Model Alcatel Lucent Transceiver iSFP-10G-LR

Model	Description
ISFP-10G-ER	10 Gigabit industrial optical transceiver (SFP+). Supports single mode fiber over 1550nm wavelength (nominal) with an LC connector. Typical reach of 40Km.
ISFP-10G-LR	10 Gigabit industrial optical transceiver (SFP+). Supports single mode fiber over 1310nm wavelength (nominal) with an LC connector. Typical reach of 10 Km.
ISFP-10G-SR	10 Gigabit industrial optical transceiver (SFP+). Supports multimode fiber with an LC connector. Typical reach of 300m.
ISFP-10G-ZR	10 Gigabit industrial optical transceiver (SFP+). Supports data transmission at 1550nm over up to 80km single mode fiber. LC connector type.