Alcatel Lucent Transceivers

Alcatel Lucent Transceiver

QSFP-100G-SR4

Product Alcatel Lucent Transceiver QSFP-100G-SR4

The QSFP-100G-SR4 Compatible QSFP28 Optical Transceiver Module is intended for 100GBASE Ethernet applications, supporting up to 100 meters over OM4 multimode fiber (MMF) using an 850nm wavelength through an MTP/MPO-12 connector. This transceiver adheres to the IEEE 802.3bm 100GBASE-SR4 and CAUI-4 standards. It includes digital diagnostics via the I2C interface, as outlined by the QSFP28 MSA, enabling access to real-time operational parameters. Easy to install and hot-swappable, this transceiver is ideal for various uses, including data centers, high-performance computing networks, and enterprise core and distribution layer applications. Note that the FS part number has changed from QSFP28-SR4-100G to QSFP-SR4-100G, but the product remains the same; only the part number has been updated.

Specification Alcatel Lucent Transceiver QSFP-100G-SR4

Feature	Description
Part Number	740-061405
Speed	4 x 25 Gigabit Ethernet, 100 Gigabit Ethernet
Breakout Capable	Yes
Transceiver Type	QSFP28
Product Type	Optical Transceiver
Connector	MPO-12
Monitoring Available	Yes
Digital Optical Monitoring	Yes
Standard	100GBASE-SR4
Standards compliance (Ethernet/OTN Standard, for e.g. 100GBASE-LR4)	IEEE 802.3ba-2010
Diagnostic support	Yes
Signaling rate, each lane	25.78125 GBd +/- 100 ppm
Transmitter wavelengths (range)	840 nm through 860 nm
Receive lane wavelengths (range)	840 nm through 860 nm
Transmitter output power, each lane (minimum)	–8.4 dBm
Transmitter output power, each lane (maximum)	2.4 dBm
Receiver input power, each lane (minimum)	–10.3 dBm
Receiver input power, each lane (maximum)	2.4 dBm
Cable type	MMF
Core size/cladding	50/125 µm
Fiber grade	OM3, OM4
Effective modal bandwidth	2000 MHz x km, 4700 MHz x km
Distance	70 m, 100 m
Maximum Power consumption (W)	3.5 W
Operating Temperature (range)	0° C to 70° C
Storage temperature	–40° C to 85° C

Other Model Alcatel Lucent Transceiver QSFP-100G

QSFP-100G-A20M	100 Gigabit QSFP28 direct attached active optical cable.
QSFP-100G-C1M	100 Gigabit direct attached copper cable 1m, QSFP28.
QSFP-100G-C3M	100 Gigabit direct attached copper cable 3m, QSFP28.
QSFP-100G-C5M	100 Gigabit direct attached copper cable 5m, QSFP28.
QSFP-100G-CLR4	100 Gigabit optical transceiver QSFP28. Supports link lengths of 2Km over singlemode fiber cables. Single MPO.
QSFP-100G-CWDM4	100 Gigabit optical transceiver QSFP28. Supports link lengths of 2Km over singlemode fiber cables. Single MPO. CWDM4.
QSFP-100G-LR4	100 Gigabit optical transceiver QSFP28. Supports link lengths of 10Km over singlemode fiber cables. Single MPO.
QSFP-100G-SR4	100 Gigabit optical transceiver QSFP28. Supports link lengths of 70m on OM3 and 100m on OM4 multimode fiber cables. Single MPO.