APC SUVTP10KH1B2S
Output
- Output power capacity
8.0 KWatts / 10.0 kVA
- Max Configurable Power (Watts)
8.0 KWatts / 10.0 kVA
- Nominal Output Voltage
400V 3PH
- Output Voltage Note
Configurable for 380 : 400 or 415 V 3 Phase nominal output voltage
- Efficiency at Full Load
95.7 %
- Output Voltage Distortion
Less than 5% at full load
- Output Frequency (sync to mains)
47 – 53 Hz for 50 Hz nominal
- Output Frequency (not synced)
50Hz +/- 0.1% for 50Hz nominal
- Other Output Voltages
380, 415
- Load Crest Factor
3 : 1
- Topology
Double Conversion Online
- Waveform type
Sine wave
- Overload Operation
60 seconds@ 125% and 30 seconds at 150%
- Maximum Output Current
16
- Output Connections(1) Hard Wire 5-wire (3PH + N + G) (Battery Backup)(1) Hard Wire 4-wire (3PH + G) (Battery Backup)(1) Screw Terminals (Battery Backup)
- Output Voltage THD
< 2% for 0 to 100% linear load and < 5% for full non linear load
- Output Voltage Tolerance
+/-1% static and +/- 5% at 100% load step
- Bypass
Built-in Maintenance Bypass, Built-in Static Bypass
Input
- Nominal Input Voltage
400V 3PH
- Input frequency
40 – 70 Hz (auto sensing)
- Input Connections
Hard Wire 5-wire (3PH + N + G)
- Input voltage range for main operations
304 – 477 V
- Efficiency at Full Load
95.7 %
- Input Total Harmonic Distortion
Less than 5% for full load
- Other Input Voltages
380, 415
- Maximum Input Current
14.0 A
- Input Power Factor at Full Load
0.98
