Rocscience Software

Rocscience RSPile

3D Pile Analysis

Lateral & Axial Pile Analysis

Carry out lateral & axial analyses of various piles with the flexibility to design piles with multiple sections and model complex soil strata using boreholes.

Capacity Pile Analysis

Analyze Load and Bearing Capacity of both Driven and Bored piles. Driven pile analysis methods are based on Federal Highway software “Driven.” Bored pile analysis with several methods available for cohesionless soils, cohesive soils, and weak rock.

Grouped Pile Analysis

Analyze a group of piles connected by a cap. Design complex models of pile groups where each pile can be a different pile type, consisting of multiple sections.

Features in RSPile

Technical Specifications

Axial Capacity of Driven Piles

Adhesion types
- Adhesion for cohesive soils
- Piles driven through soft clay
- Piles driven through overlying
- Sands or sandy gravel
- Piles without different strata
- User-defined adhesion
Calculated capacities
- Restrike, driving, ultimate
Design considerations
- Long and short-term scour
- Soft compressible soils
- Negative skin friction
Non-tapered pile types
- Pipe—open and closed end
- Concrete
- H-Pile
Soil materials
- Cohesive / cohesionless
Tapered pile types
- Timber
- Raymond uniform taper
- Monotube

Axially Loaded Piles

Axial resistance analysis
- Max allowable axial displacement
- Ultimate axial resistance
Pile top loading
- Axial
Pile Types
- Cylindrical
- Rectangular
- Pipe
- Common sections
- Tapered or non-tapered
- Reinforced concrete
- Prestressed concrete
- Elastic or plastic
Soil materials
- Elastic
- API sand
- API clay
- User-defined
- Drilled clay
- Drilled sand
- Coyle Reese Clay (driven)
- Mosher Sand

Laterally Loaded Piles

Additional loading
- Loading by lateral soil movement
- Transition zone for sliding soil in lateral resistance function
- Lateral resistance function (multiple soil movement cases)
Advanced computation options
- Stiffness matrix calculator
- Pushover analysis
- Pile length vs top deflection
Group analysis
- Cap designer
- Radial, rectangular, custom patterns
Pile toe loading
- Shear resistance
- Lateral resistance analysis
- Max allowable lateral displacement
- Ultimate lateral resistance
Pile top loading
- Moment in X and Y
- Shear in X and Y
- Slope in X and Y
- Rotational stiffness in X and Y
- Deflection in X and Y
- Axial load
- Define any combination of loading
- LRFD combinations
Pile types
- Cylindrical
- Rectangular
- Pipe
- Typical sections
- Elastic and plastic
- Reinforced concrete
- Prestressed concrete
- Pile with casing/core
- Tapered or non-tapered
Soil materials
- Elastic
- Soft clay soil
- Submerged stiff clay
- Dry stiff clay
- Sand
- Weak rock
- User-defined
- API method for sand
- Loess
- Liquefied sand
- Piedmont residual soils
- Strong rock (vuggy limestone)
- Modified stiff clay without free water
- Silt (cemented C-Phi soil)
- Soft clay with user defined J
- Hybrid liquefied sand
- Massive rock
Output
- Displacement X and Y
- Rotation X and Y
- Beam shear force X and Y
- Beam moment XY and YZ
- Soil reaction force X and Y
- Soil stiffness X and Y
- P-Y curves with depth
- Use any input parameters as random variables

Model Definition

Boreholes to define stratigraphy
Definition of multiple and pattern piles

Additional Features

Full 3D FEM pile engine
P-Y modification factors
T-Z modification factors
Q-Z modification factors
Static and cyclic loading options
Integration with Slide2
Export to Slide2
Export to Excel
Info Viewer

RSPile across Applications

Model pile foundations and analyze their response under various loads.

Design pile supports, which can then be used in Slide2 to investigate their effects on the stability of rock slopes or soil slopes.

Explore the latest features in RSPile

Calculate pile capacities at different locations for different types of piles automatically and generate the results into a table and a series of graphs. This feature not only provides you with the ultimate skin friction and ultimate tip resistance but helps apply different factors of safety to determine the allowable carrying capacity of the piles.

Raymond and Monotube piles are back in Driven Analysis with the additional tapered sections. Calculate the driven capacities of tapered piles with the flexibility of making any cross-sections tapered in the Pile type Editor, except for the H-Pile.

RSPile’s new functionality helps you plot interaction diagrams for your reinforced concrete sections and see their structural capacity in a single click. Seamlessly plot the nominal axial load capacity P against the nominal bending moment M for a given angle of load application and generate the maximum moments Mnx’-Mny’ for a given load.

Contact ME On Email

Other Rocscience Product

Rocscience Settle3

Rocscience Software Rocscience Settle3 Soil Settlement and Consolidation Analysis Settlement Analysis Perform soil settlement analysis to analyze immediate settlement, primary consolidation and secondary settlement of embankments, foundations, and surface loads....

Rocscience CPillar

Rocscience Software Rocscience CPillar Support Estimation Using Ground Reaction Curves Crown Pillar Stability Analysis Get quick and easy stability analysis of surface or underground crown pillars and laminated roof beds using three different limit equilibrium...

Rocscience RocSupport

Rocscience Software Rocscience RocSupport Support Estimation Using Ground Reaction Curves Ground Reaction Curve Easy-to-use software for estimating deformation of circular excavations in weak rock. Given the tunnel radius, in-situ stress conditions, rock parameters...

Rocscience UnWedge

Rocscience Software Rocscience UnWedge Underground Wedge Stability Analysis Underground Wedge Stability Analysis Analyze underground tunnel excavations with intersecting discontinuities and visualize the model in 3D. Determine the stability of tetrahedral wedges...

Rocscience EX3

Rocscience Software Rocscience EX3 3D Stress Analysis for Underground Excavations Boundary Element Method & Stress Analysis Perform faster analysis of underground excavations using Boundary Element Method, which only requires meshing of the surface, resulting in...

Rocscience RSLog

Rocscience Software Rocscience RSLog Web-based Borehole Log Management Borehole Data Management Centralize your borehole data and streamline the process of field data collection, review, and preparation of borehole logs. Designed for geotechnical, environmental, and...

Rocscience RocTopple

Rocscience Software Rocscience RocTopple Toppling Stability Analysis for SlopesBlock Toppling Model Analyze 2D block or block-flexural toppling stability given the slope geometry, and the joint spacing, dip and strength. RocTopple employs the Block toppling method of...

Rocscience RocPlane

Rocscience Software Rocscience RocPlane Graphical and Statistical Analysis of Orientation DataPlanar Rock Slope Analysis Quickly and easily define planar wedge models, visualized in 2D and 3D. Perform planar sliding stability analysis using Limit Equilibrium Method....

Rocscience Dips

Rocscience Software Rocscience Dips Graphical and Statistical Analysis of Orientation DataStereographic Projection Analysis Designed for interactive analysis of orientation based geological data. Visualize orientation vectors, density contours, planes, intersections,...

Rocscience RSData

Rocscience Software Rocscience RSData Strength & Stress Analysis of Rock and Soil MaterialsVirtual Soil Mechanics Lab Utilize constitutive models like NorSand and Modified Cam Clay to get an in-depth look into the stress-strain relationship of your soil materials....

« Older Entries

See All Brand Software